Specification
Type: WiFi Thermostat Temperature Controller
Material: Anti-flammable PC
Voltage: AC 95~240V, 50/60Hz
Power consumption:2w
Max. Current Load: 16A
Temperature Setting: 5~95℃
Limitation range:5-60℃
Switching differential:1~9.5℃
Ambient temperature:-5℃ ~ 50℃
Protective housing: IP20
User Operation
1. Press the "⊙" button, power on/power off.
2. In time slot mode, press the "▲"or"▼"button will enter temporary mode。
3. Long press "■" and"▲"button 5s will enter time setting mode. Press the "■" button toggle setting options, press the "▲"or"▼"to adjust the value.
4. Hold on "■" button 5s will enter manual mode or time slot.
5. Locking and unlocking-press the"▲"and"▼"at the same time.
6. Networking mode: Hold on "▲" button 5s until the WiFi signal flashing.
- Temperature compensation
- Sensor selection
- Limit temperature value setting
- Temperature difference start
- Antifreeze function
- Day off selection and exit week programming
- Primary and secondary reverse selection
- Passive output delay setting
- Set temperature upper limit
- Restore original mode
Packing List
1*Thermostat
1*Sensor probe(only electric floor heating include sensor cable)
Screws
Manual
T***I
Arrived immediately non-working. The seller did not answer. Ali returned the price
S***h
ok