Rated Supply Voltage: AC100V – AC240V
Electric Current（> A）Setting Range:1-63A
Rated Frequency：50/60Hz
Operation Voltage Range: AC80V-400V (single phase)
Output Contact: 1NO
Power Display Range: 0-99999.9kw/h
Reset/Start Delay: 1S-500S
Operating Temperature: 30℃ to 70℃
·Remote control ON/OFF at any time from anywhere by phone.
·Review current, voltage, leakage current, and total kWh on the phone
·Can set over voltage/under voltage/over current /leakage current in
app or can set these parameters on the protector
·Over voltage protection 110V-300V(adjustable)(default:270)
·Under voltage protection 85V-220V(adjustable)(default:170V)
·Over current protection 1A-63A(adjustable)(default:50A)
·Electric leakage protection:10-99mA(This feature can be turned off)
● Protect Action Time:0.5-30s(default:1s)
·Reconnect time(delay on time):15-500s(default:10s)
·Light source:1-120s adjustable(default:ON)(optional)
·Three timing modes: timing mode/countdown mode/cycle timing
·Note: If your voltage is 110VAC, the protector will over-voltage protect when you first time use it. Pls change the overvoltage (110V-300V) and under voltage(85-220V) according your demand
 Output Contact: 1NO Power Display Range: 0-99999.9kw/h Reset/Start Delay: 1S-500S Operating Temperature: 30℃ to 70℃ ·Remote control ON/OFF at any time from anywhere by phone. ·Review current, voltage, leakage current, and total kWh on the phone ·Can […]){kind=link}
A***a
Delivery to Ukraine 10 days of air Press. If I am a little bit of the parameteries with the clavish of the relay itself, then the mittevo from the Tuya got the news of the relay (we got it to check it into the stazosunka), ale the yakshchi and the parameters for the sake of the stazunka, then the relay is not evil for the ossunk. Yakshshchi visie zminyuvati the parameters with klavish, then demanding in the head menu to tighten the set and check button, Poki do not blink the upper porig sprugi, zminyuvati is significant in strings, and put it on short set to the head menu. A hundred relays: Let me have contacts of the 0.5 up to 1mm (it’s not enough). Self-contact relays, Shini, shunt, contacts do not become magnetized (ludzhena MIDH), ale ziskach with a gvint. I would not recommend vikoristoviati yak vonotsina Zamina to the automatic vimikachu (for a short zamikannya Vin cannot be saved). Sbivannya: 1.4 Tu-in a timid mode, 2.5 Tu-in a relay. Relay at the news, the thobto of the post-life life of the nemakiy cat (tylki when passing). Need to be alive on “automatic”, then the relay will be caught.