Specifications
From the APP You Can Read:
Hourly Elec. (KWh)
Weekly Elec. (KWh) on 'Smart' Page
Daily Elec. (KWh), on 'Smart' Page
Monthly Elec. (KWh) on 'Smart' Page
Current Ele(mA),
Current Power(W),
Current Voltage(V),
Please note it's not bidirectional meter, it can only measure the consumed power. and only show positive data on App.
Technical Data:
Rated Voltage:100-240V AC 50/60Hz
Measurable Current Range: 0.2A-80A
Protocal: ZigBee
WiFi Frequency: 2.4GHZ (Not Support 5Ghz)
Ambient Temperature Range:-10°C ~ 55°C
App Real Time Monitor Energy Consumed KWh. Voltage, Current, and Power, also can Monitor Device Working Status
Automation , It allows to make a Scene for this device working with other tuya devices
Set Automation for the Measured Device ,
For example, If Power or Current Is over the Value, then other tuya device starts to work .
Automation. Send A Notification
Non-connect to Be Safe, Easy and Safe to Install
No need to change the wires, Just put the wire into the clamp, then it can measure, very easy.
 Weekly Elec. (KWh) on 'Smart' Page Daily Elec. (KWh), on 'Smart' Page Monthly Elec. (KWh) on 'Smart' Page Current Ele(mA), Current Power(W), Current Voltage(V), Please note it's not bidirectional meter, it can only measure the consumed power. and only show positive data on App. Technical […]){kind=link}
B***U
Very fast shipping, the item arrived almost 2 weeks before the expected date. It works as expected, fully recommended!
AliExpress Shopper
Works with jeedom and zigbeelinker
Received quickly
J***e
Zigbee,
IT might be better implemented, missing adjustment functions but ones installed it works and
looks to collect the data
I will order few more for all my Aircons
L***r
with custom quirk works with home assistant. recommending seller
AliExpress Shopper
To be tested To be tested To be tested To be tested To be tested To be tested To be tested To be tested
M***g
Works great! My condenser runs between 240V-250V and this meter works regardless. Super easy to set up, and worked first time with Z2M.
K***z
It is working, but readings are inaccurate. They are lowered.
C***r
Working with Home Assistant through Sonoff Zigbee Dongle Plus.
S***o
Unlike other users I have not been able to install the product on Home Assistant. I tried with ZHA and Z2N… Nothing. Maybe someone else will be luckier. Anyway impeccable return service! Thank you!
AliExpress Shopper
No native zigbee2mqtt support. this device ‘is being identified as Zigbee Model: TS0601 Zigbee Manufacturer _TZE284_cjbofhxw. The original product supported by z2m is model: ‘PJ-1203-W’, vendor: ‘TuYa’, so be careful what you are buying. Nevertheless, it works satisfactorily, even though the energy measurement is not accurate which in Tuya APP might be better supported (haven`t tested it,…yet).
M***s
Works very well but don’t forget to buy the geibee platform
b***r
Works great in Home Assistant via Zigbee2MQTT. Updates fast and provides data I need to run automations based on power consumption.
A***k
Does not work with z2m, but there is a converter makes it working (search for it).
g***r
Good product even if the accuracy is not its strong.
The installation is very simple and the operation is intuitive. Unfortunately, the check interface does not allow configurations related to the scale to be used, in fact the watmeter scale backdrop is preset to 20000W but if I have to check a reading of a few W is difficult to read. On the contrary, the measurement of the ammeter is in mA so I have to read 4 or 5 digits to understand the absorption (20000 W at 220V are about 90,909 A or 909ma).
Lastly, the fluctuation of the readings. At constant load the measurement is always fluctuating, probably due to the detection scale used.
For non-professional use it is certainly a valid product, I doubt that in professional fields it can be taken into consideration.
J***a
Great cost X benefit, I found the measurement update fast.
i***r
Easy to install and synchronize, very happy
AliExpress Shopper
The product has not yet been tested by measurement. But integration into Home Assistant was seamless via Zigbee2mqtt. I hope it will work.
D***a
Great, very precise reading, it also goes with HA, without any weird thing, you have to have ZigBee hubs. But it’s a pity that I can’t set warnings when reaching the threshold… crazy.