PAC5000 series products can support the 1P2W, 2P3W, 3P3W, and 3P4W grid environment analysis of electric power parameter measurement, and at the same time provide multi-channel digital input/output interface, and SOE function, is suitable for real-time power monitoring and control system, the energy consumption management system, industrial monitoring site using a variety of applications such as environment, has the multi-function, high stability, and long life characteristics.
Specification
1、Multi-function parameter measurement, providing voltage, current, active power, reactive power, apparent power, power factor, phase Angle, etc.
2、Provides a variety of analytical parameters, such as total harmonic distortion (THD) and Individual harmonic distortion (IHD) of voltage/current, voltage/current unbalance factor, voltage crest factor, current K factor, etc. The Sub-harmonic component is maximum supported to the 63rd.
3、External current transformers of output types such as 5A/100mV/100mA are supported, and direct access of the Rogowski coil is also supported. With the current transformer reverse connection correction function.
4、Support external voltage transformer access, input voltage minimum support 30V.
5、Embedded installation, product panel size is 96*96mm.
6、Plug and pull type connection mode, convenient construction connection.
7、Liquid crystal display with backlit, backlight lighting time adjustable.
8、LCD refresh time is 1 second, support manual or automatic scroll display (configurable).
9、Support multi-channel digital input and output interface.
10、Two pulse optocoupler output interfaces are pulse 1 and pulse 2 respectively. The output parameter can be set for pulse 1, while the fixed pulse 2 represents the total active energy of the secondary side, which cannot be set.
11、Support RS485 communication function, baud rate up to 38400bps, support Modbus RTU, MBus protocol.
Package Included
You choose
R***s
Install Easy, have only change set CT! from 5 A to 150 A and the back lite set from 60 to 5 minutes.
I have by e-mail the manual, read good that uou must hold button nr 4 for more seconds (even as the password is 0000). to open multible acces holfd nr 4 for couple of seconds.
M***u
Great instrument. I have been using them for monitoring voltages, currents, PF and power of small hydro turbines.
R***G
It has arrived. I’ll try it this weekend, I hope it works..
M***u
Great product! This is the third one of this type I ordered and deployed. With this one I needed to use the Modbus RS485 communications. Taiye Electric Store emailed me the Modbus communications guide (PAC5000ModbusProtocolV1_0.docx) on request and it worked great “out-of-the-box”.
M***u
Great device, the 4th one I have installed on generator installations. Modbus RS485 works great.