Specifications
Item: Tuya Zigbee smart knob scene switch
Wireless Protocol: Zigbee (need Zigbee gateway)
Working Voltage: 3V
Standby Current: ≤8uA
Battery Type: CR2450(include battery)
App: Smart Life / Tuya Smart
Working Temperature: -10°C~55°C
Working Humidity: ≥90%
【Two-in-one device for wireless scene】In the scene mode, the buttons respectively support single-click, and double-click scene requirements. You don't need to click the scene mode on your phone, just click the ZigBee smart remote control to open the smart scene.
【Wireless control of ZigBee dimming lamp in remote mode】Add an intelligent knob switch in Tuya intelligent ZigBee gateway, and then add an intelligent ZigBee light bulb under the remote dimming interface in the App, so you can remotely control your lamp wirelessly. (Note: Only ZigBee lamp can be added for control)
【Four operations under remote mode to meet different demands】Single press to ON/OFF the bulb, rotate to normal dimmer, press and rotate to set the color temperature, and long press more than 3 seconds to set color, which clarifies the real-sense of value for money with this mini excellent device.
【Create multiple intelligent scenes for weblink smart devices in the App under scenario mode】To create any smart automation you want on your smartphone app to start your another intelligent lifestyle, when you are tired from one-day work, such as home mode, waterproof level up to IP55 for wider applications.
 Working Voltage: 3V Standby Current: ≤8uA Battery Type: CR2450(include battery) App: Smart Life / Tuya Smart Working Temperature: -10°C~55°C Working Humidity: ≥90% 【Two-in-one device for wireless scene】In the scene mode, the buttons respectively support single-click, and double-click scene requirements. You don't […]){kind=link}
H***f
I am unable to use the product yet because it requires a very tiny screw driver to put the CR2024 battery. I will need to purchase a new screwdriver to use it
G***o
a bit wobbly but its good for the price. and works as it should be .
painted to black the moment i receievd to match my other smart switches
W***n
the dial isnt as smooth as I would of hoped and has quite a bit of wiggle. that said, it works and is fun to think of automations for it.
J***R
OK. I have not tried but it will work without problems I have this and the one of moes and they are fine.
a***r
The first impression was that the cap of the dimmer is very shaky. A training to Home Assistant by Zigbee 2Mqtt worked without any problems and after a while all functions were available. Unfortunately, the dimmer with a button reacts only very unreliably. Sometimes it works, sometimes many seconds later, sometimes not at all.
I will dispose of the button and replace it with another, as this does not ensure reliable function. Can be.
AliExpress Shopper
As advertised
D***i
Integration with Home Assistant via ZHA. Recognized instantly. All buttons seems to work fine. One click, two clicks, long click, rotate fast (described as rotate right/left), rotate slow/fast.
AliExpress Shopper
The seller Thank you. Took for use in the home assistant in the direct banding mode (in the group). As a result, everything works, but the setup process was not simple. Switching by triple click (as written in the instructions) to direct banding mode (commands) did not work. As far as I understand, this should be done immediately when adding a device to a home assistant. There’s probably some timeout. After that does not switch, I had to delete, reset and add again.