This Switch can work with no Neutral wire and Neutral Wire
NOTE:
1, This Switch can work with no Neutral wire and Neutral Wire. Wire connection is different. Before you buy, please confirm whether your House wiring is No neutral required. If you don't have a neutral wire, A capacitor is a must to be connected to both ends of the bulbs for normal work.
3)Built-in RF433 frequency allows for another control via RF remote control switch with encoding 1527(Note:433 RF Remoter is not included in the package, please purchase separately)
Specification:
Type: 1/2/3 Gang Touch Wi-Fi Switch
Material: PC V0 fireproof + tempered glass panel.
Rated Voltage: AC90V-260V, 50/60Hz.
Load Power:3-300W/gang(Note: If it is used for LED or energy saving bulb, the power load should be less than 100W)
RF Frequency: 433MHz.
Wi-Fi: 2.4GHz, IEEE 802.11 b/g/n
Support by: Android and iOS
APP: Tuya /Smart Life
Features:
【Remote Control】 The user can use a smartphone to control the home electronics remotely anytime, anywhere as long as the phone has a 2G / 3G / WIFI network compatible with the iOS and Android operating systems with Smart Life and Tuya app
【Voice Control】Compatible with Amazon Alexa (Echo / Dot / Dot / Tap), Google Assistant, and IFTTT. Flight ticket counter with Amazon Alexa or Google Home to turn your switch on or off with your voice, No hub required
【TIMING】The intelligent timer switch will automatically turn on after setting a timer for this switch, which is essential for daily scheduling, and brings you a comfortable and intelligent lifestyle
Tips–App
Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz networks and your phone will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.
In addition, the router encryption mode must be WPA2-PSK type and the authentication type must be AES
a***r
After plugin the switch, two of my bulbs are hs.