【 Product 】 WIFI-BOX for 3D Printer
【Use for】 FDM 3D printers, suitable for FDM 3D printers without wireless transmission modules, to solve the problems of frequent card unplugging, frequent card formatting, incomplete files, and printing interruptions caused by the lack of wireless transmission modules in most FDM3D printers on the market. transmission speed up to 1.8MB/S.
【Adaptation】The following printers have been determined to be installed
—ELEGOO—
NEPTUNE3 PRO
NEPTUNE3 PLUS
NEPTUNE3 MAX
—CREALITY 3D—
ENDER3 V2
ENDER3
NEOENDER3 MAX
—KINGROON—
KP3SKP3S
PROKP3S
PRO S1
—ANYCUBIC—
KOBRA
KOBRA PLUS
KOBRA MAX
—TWOTREES—
3DSP-5V1
SP-5V2
【Function】
1. Plug and Play is practical and convenient
2.1.8MB/S high-speed transmission
3. Suitable for most models
4. Do not brush or disassemble the machine
5. MD5 transmission integrity verification
【Usage】
1. Install the Cura plugin or Prusa plugin to automatically search for devices (LAN), which can be directly transferred to the printer after slicing
2. Initialization installation can be done by scanning hotspots on a mobile phone or computer to connect to a wireless local area network. There is no need to remember the IP address
3. The transmission speed can reach up to 1.8MB/S (when the WIFI signal is strong)
4. Plug and play, without disassembling or brushing the firmware, plug in a cable to use
5. A simple WEB management interface for file management and firmware upgrade
6. It is fast and accurate. After the file transfer is completed, an MD5 file fingerprint comparison will be performed. If the transfer file is found to be incomplete or any byte is incorrect, the file will be automatically deleted and a retransmission is required to avoid strange issues during the printing process
7. Automatically notify the printer to refresh the file after transmission, without the need for a reboot
Detailed instructions for use:https://github.com/GMaker-git/WIFISD
S***s
Does not work a few for Cura
M***R
Lightning fast shipping, product arrived but does not work with Artillery Genius
D***s
Quality product and works very well. The accompanying manual is quite simple, but there is a link to a page on GitHub with more precise directions. Although it does not inform you, it is possible to use it from the Orca slicer.
M***r
Worked on an Anycubic Kobra 2! Make sure the WiFi box is inserted nice and tight so that it can recognize the file!
M***n
Works great. Way easier to set up than some of the other options I’ve tried (and never could get to work) The only thing I wish I could do is send the files to folders on the SD card for better organization instead of everything just going to the root.
B***a
I can’t connect
T***g
I ordered this wifi module for my anycubic kobra 2, because I was tired of constantly formatting my microphone map SD, because of the switch from PC to printer. I tried another solution (bluetooth server module) that had not worked, so I was not very confident.
At the beginning, with this module it summer not easy, because the lock system of the drive of the K2, did plus work. I printed a screw-in block, for the file, to fix the problem.
Then, do not search to associate the module with the network using your PC; Do it with your mobile phone!
With a map Philips 8 Go class 10, no transmission or printing error!
The interface via the browser is great.
The software to download is well done too.
n***r
I’m still trying to connect my Ender 3d printer to wifi with this
S***a
it will work with Longer LK5 pro without external power supply