Temperature Thermometer Humidity Hygrometer Detector Alarm Sensor Smart Life Tuya App home thermostat Controller
Description
Powered by:DC5V 1A power adapter (included)
Built-in rechargeable battery:3.7V 1100MA
Battery standby time:about 6 hours
Alarm Indication:The digital tube number flashes
Pairing indication:Green indicator flashes
Detecting temperature:-40℃ to +120℃
Detecting Humidity:0% to 100% (no condensation)
Temperature humidity accuracy:0.5℃ 1%RH
Measurement error:±1℃ ±3%RH
WIFI band:2.4G ( not support 5G)
Buzzer alarm time:default 15 seconds uncontrollable
Size:90mm x 63mm x 25mm
Note:the backup battery switch located at circuit board. For the first time use, please remember to open the back cover, then switch on backup battery switch.
If the temperature ( Humidity ) is higher or lower than the range of temperature (humidity ) we preset . The detector will push the alarm alerts to app and at the same time the detector will sound to remind to control the temperature ( humidity). And you can do the real-time supervision via app .
Features :
1.Temperature & Humidity Detection 2 in 1 .
2.Built- in Rechargeable battery : can be powered by external DC5V power supply or standby battery ( Please note : if you want to power the detector via backup battery ,Please open the back cover and switch on the detector ) .
3.Temperature Unit is optional （Centigrade or Fahrenheit ).
4.Check the History Record of temperature or humidity anytime.
5.Multi -User Supervision Supported : you can click to share the device to other users .
6.Buit in Buzzer : the Buzzer will sound when the detector was triggered.
7.APP ：you can download it by searching for Tuya Smart or Smart Life
 Built-in rechargeable battery:3.7V 1100MA Battery standby time:about 6 hours Alarm Indication:The digital tube number flashes Pairing indication:Green indicator flashes Detecting temperature:-40℃ to +120℃ Detecting Humidity:0% to 100% (no condensation) Temperature humidity accuracy:0.5℃ […]){kind=link}
Л***ч
In general, everything works in the bathhouse, but due to the fact that the wire is short, the device itself is in high humidity and temperature, it began to overload itself. I had to cover the board with a layer of varnish, at the same time lengthened the antenna.