Quality Guarantee

We guarantee good quality, every product will be tested before delivery.

Note Before Order – Tuya ZigBee Gateway Is Required

1. Tuya ZigBee Gateway Is Required to Connect with this Device to Work, If You Don't Have the Gateway Yet, Please Click Below Picture to Buy
2.It's high Amp item, and the device needs certified and professional electrician for wiring.
3.The frequency of the wireless router is 2.4GHz.
Main Features

• Tuya compliant
• Support Tap-to-Run and automation with other Tuya device
• Single/3 – phase electricity compatible
• Three current transformers for Single phase application
• Measures real-time Voltage, Current, ActivePower and total energy
consumption
• Suitable for both residential and commercial application
• Lightweight and easy to install
• External antenna prevents signal from being shielded

Clamp Diameter

80A:10.2mm
120A:16mm
200A:20mm
300A:24.8mm.
500A: 37.5mm

750A:51mm

1000A:51mm

Warning

Important safety information:
• The power clamp must be installed and serviced only by a qualified
electrical personnel.
• Do not touch the terminals of the device during testing.
• Turn off all the power supply for this equipment before installing.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace all devices, doors and covers before applying power to the
equipment.
Failure to follow these instructions will result in death or serious
injury.

When you install the CT , please note the CT's direction, make sure all 3 CT with the same direction.

Please follow the arrow's direction to install the CT

Single Phase and 3 Phase Wiring Diagram

For safety, please make sure the main power in your faciligy is off before installation.

According to your need, you can make 2 kinds of wiring connection.

NEW Version with External Antenna

Real-Time Monitor each phase's power, voltage, and current, but not able to monitor each phase's KWh, can real time monitor total 3 phase's KWh

View Electricity Consumption History Daily Weekly Monthly

 

App Smart

1. Please make sure your App version is the latest version above 3.35.0

2. Please Click 'Smart' icon to Find the Power Usage pagePress and hold the reset button for 5 seconds until the LED indicator flashes 3 times quikly to restore factory settings (energy data will be cleared). And it will get into EZ mode for 3 minutes.

 

Additional information

Weight 0.0 kg
  • Author’s gravatar
    C***d
    7 months ago

    Meter assembly and association with the tuya app without worry, but a pity not to have more explanations on the functions of the meter

  • Author’s gravatar
    L***u
    6 months ago

    very easy, to set up and use, work with smart life, bidirectional way for systems with photovoltaic solar system. Nice item I like it. I hope the metering is precise, I didn’t compare it with any other instrument. fast shipping

  • Author’s gravatar
    E***a
    6 months ago

    Good equipment I will use it as my laboratory network analyzer, it would be good if it has reactive power measurement…

  • Author’s gravatar
    창***유
    6 months ago

    I like the product.

  • Author’s gravatar
    AliExpress Shopper
    6 months ago

    It works.
    I had a little trouble connecting, but eventually it worked out.
    You have to put the cables a few times to hit the first phase because the description in the board is not always correct.
    The only minus does not show consumption at each phase.

  • Author’s gravatar
    E***o
    6 months ago

    All pratsyu chudova, le day shows are underestimated. And so all the norms. I will show you normally.
    With the first thing, the firmware was updated. Batter Poki. And so shnyaga is class.

  • Author’s gravatar
    T***e
    5 months ago

    Works well although I’m only using two phases in the US at this time.

  • Author’s gravatar
    K***b
    4 months ago

    Easy to install, quick to connect to the app.

  • Author’s gravatar
    P***k
    4 months ago

    The device works very well.

  • Author’s gravatar
    S***a
    3 months ago

    Faced difficulty to detect the device but after hard power reset it was detected on Zigbee network. Measurement seems ok and accurate, but phase A was giving wrong readings (30,000 watts!) despite installing the clamp in the correct direction same as B and C. After flipping, it seems the reading is corrected, maybe a factory fault in the direction arrow. Store was not helpful in troubleshooting but advised me to return and refund. I refused due to installation cost and effort but ended up diagnosing and fixing the issue. All in all, happy with it.

  • Author’s gravatar
    AliExpress Shopper
    3 months ago

    Fast Delivery (9 days before Kiev).
    The device works fine, but it seems to me that the power readings are overstated (there is no way to check yet). I use homeassistant + zigbee2mqtt. There were minor problems when connecting to the Gateway.
    As I understand it, there is one small nuance that has not been written anywhere: the device independently tries to look for the Gateway only after turning on the power, and in a very limited period of time (30-60 seconds). If the gateway is not found during this time, then the device goes into a kind of “passive pairing mode”, in which you need to connect to it through the smart life application. While the LED indication does not change in any way: the LED flashes red.
    Resetting the device with the “reset” button does not help, which is not very convenient, since the only way to make it look for the ZigBee network again is to turn off and turn on the power.

  • Author’s gravatar
    c***r
    3 months ago

    it works

  • Author’s gravatar
    J***r
    2 months ago

    Fast on-time delivery, items as described and works.

  • Author’s gravatar
    A***R
    2 months ago

    item as described

  • Author’s gravatar
    U***z
    2 months ago

    due to a small accident I was not able to test it yet. But it looks very good, and is smaller than I thought, very nice

  • Author’s gravatar
    a***r
    2 months ago

    It wasn’t what I ordered, but the money was returned

  • Author’s gravatar
    S***n
    1 month ago

    Works great with Home Assistant

  • Author’s gravatar
    B***y
    1 month ago

    The parcel arrived quickly in just 8 days. Connected everything works.

  • Author’s gravatar
    M***l
    1 month ago

    Didn’t work on the homeassistant. But in smart life it works well.

Only logged in customers who have purchased this product may leave a review.

Vendor Information

Vendor: Digifolio

Rating: 4.65 rating from 3386 reviews
Company: Digifolio Ltd

Your name: Your email address: Your message:

£6.94£193.32 ex. VAT

Tuya WiFi ZigBee Smart Energy Meter KWh Power Monitor 3 Phase Single Phase 500A 300A 200A 120A 80A Clamp Current Transformer
  • 0 Sales
  • 18 Ratings
  • 114 Views
Clear

Specification

Last Update: October 2, 2024
Relased: September 23, 2024
Color 120A 200A 300A 500A 80A Zigbee gateway
Size